How to repair the regenerator lattice brick that has melted into a tumor or caused blockageUnder the erosion of flame and powder, the grid bricks in the regenerator are gradually melted into tumors, causing the grid body to be blocked or even collapsed, reducing the h··· ...

Introduction of glass furnace & selection of refractory productsFor large float glass lines,the glass furnace is usually composed of L backwall for glass doghouse (usually using silica bricks), melting end (the area in direct contact with the molten glass should u··· ...

Selection of Refractories for Glass Furnace RegeneratorModern large-scale glass furnace, such as float glass furnace, currently use regenerator to recover heat. It use refractories as regenerators (called checker) to store part of the heat of the flue gases discharged··· ...

Structural analysis of float glass melting furnaceCompared with other flat glass melting furnaces, the float glass melting furnace is not much different in structure. It is a shallow pool cross-flame furnace, but in terms of scale, the scale of the float glass melting··· ...

Reasonable selection of fused zirconium corundum bricks, these 5 principles should be kept in mind:In recent years, with the digestion and absorption of imported technology, the advancement of kiln technology has continuously increased the quality requirements for til··· ...

A brief introduction to refractory materials for glass kilnsGlass melting furnace is a thermal equipment made of refractory materials for melting glass. When selecting refractory materials for glass kilns, you should consider the kiln type, use location, damage mechan··· ...

The difference between sintered AZS bricks and fused AZS bricksSintered AZS bricks are products made of zircon and alumina as the main raw materials and pre-synthetic materials as aggregates. Since the blank is a barren material, it is not effective to increase the de··· ...

What refractory materials are needed for the main components of a glass furnace?For large float lines, the glass furnace usually consists of an L-shaped hanging wall (usually using silica bricks), a melting section (the area in direct contact with the glass liquid use··· ...

The difference between fused zirconium corundum bricks and fused corundum bricksFused zirconium corundum brick(fused cast AZS brick)Fused zirconium corundum brick AZS33#:The dense microstructure of AZS33# zirconium corundum bricks makes the bricks highly resistant to ··· ...

Classification of crucible kilnsCrucible kiln, also known as crucible furnace, is a small intermittent glass melting furnace that melts glass batch materials in the crucible in the kiln. Place a single or multiple crucibles in the kiln, put the batch materials into th··· ...