Issues that need to be paid attention to in the lining design of the liquid hole, tank bottom and other parts of the glass kilnAbout the structural design of the liquid holeThe liquid hole is an important part of the glass furnace. The melted, clarified, and homogeniz··· ...

Configuration of refractory materials at the bottom of glass melting furnaceThis part of the glass melting furnace bottom is only corroded by the liquid phase, and is not corroded by the glass liquid level and the three-phase interface. Only when the molten glass reac··· ...

Analysis and Countermeasures of Refractory Bubbles in Ultra-White Glass ProductionAbstract: During the production of ultra-clear glass in a float glass production line, a large number of bubble defects appeared. There was no obvious pattern in the distribution of the ··· ...

Advantages of full oxy-combustion technology for liquid crystal glass furnacesTraditional glass kilns generally use air-assisted combustion heating methods. Air-assisted combustion has many disadvantages, including high energy consumption and high pollution. The oxyge··· ...

Performance and working principles of 9 common refractory bricks used in glass kilnsIn the configuration design of glass kiln lining, shaped refractory bricks are mainly used. According to the working conditions and environment of different parts of the glass kiln, th··· ...

Selection of checker brick material and brick type for glass kiln regeneratorThe grid body is an important part of heat storage and heat transfer in the regenerator. The grid bricks are required to be able to withstand high temperature, corrosion resistance, large hea··· ...

Development of electric melting furnaceIn 1902, Voelker was granted a basic patent for the use of heat generated by passing an electric current through a glass batch to melt glass. It was discovered that glass is an electrical conductor at high temperatures. The alkal··· ...

Alteration of fused zirconium corundum bricks in glass kilnElectro-fused cast zirconium corundum (AZS) bricks are mostly used in high-temperature parts of the kiln and in parts severely corroded by glass liquid. Different brick models are usually marked by the amount ··· ...

Alteration of fused zirconium corundum bricks in glass kilnElectro-fused cast zirconium corundum (AZS) bricks are mostly used in high-temperature parts of the kiln and in parts severely corroded by glass liquid. Different brick models are usually marked by the amount ··· ...

The insulation of the bottom and walls of the pool is carried out in a cold state, while the insulation of the rest of the kiln is carried out in a hot state.The key to pool bottom insulation is to prevent glass liquid from entering the bottom insulation layer. Theref··· ...