Tin bath bottom block

Tin Bath bottom block introduction

       Tin bath is a key part of float glass production line, and the bottom block is the important structural material of its normal operation. There problems caused by the block are closely related to its chemical composition and fabricaiton proces,Huachen refractory company produced tin bath bottom blocks can used more long time and more safety.

       Huachen company produced tin bottom block is made of calcined siliceous minerals and silica-aluminous minerals rich in glass phase as the filler of aggregate, and the high alumina cement as the binder, instead of raw clay as the binder, completely changing the mineral structure of the bottom brick matrix.Because the matrix part contains a higher glass phase and a small amount of mullite phase, the matrix part shrinks very little after burning, and most of the pores are closed pores, which is not easy to form nepheline, thus extending the service life of tin groove bottom brick.

      Characters of Tin bath bottom block

      Tin bottom brick is our company development product in the year of 2006, .It is widely used in tin tank bottom of float glass kilns at home and abroad, and has been used in more than 50 float glass production lines at home and abroad.The physical and chemical properties of the product are excellent, and the appearance size is accurate. After 10 years of continuous use, no nephelinization, spalling or cracking occurred on the surface.This product can used for the whole float glass tin bath bottom.

                                      Tin bath bottom block                                                            Tin bath bottom brick